banner_page

MC14052BDG

DP4T 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14052B 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC14052BDG
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 193
  • Description: DP4T 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14052B 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 1.05kOhm
Subcategory Multiplexer or Switches
Max Power Dissipation 500mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC14052B
Pin Count 16
Power Supplies 5/15V
Number of Channels 4
Max Supply Voltage 18V
Min Supply Voltage 3V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Nominal Supply Current 15nA
Power Dissipation 500mW
Propagation Delay 75 ns
Turn On Delay Time 600 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Halogen Free Halogen Free
Supply Type Dual
Bandwidth 17MHz
Turn-Off Delay Time 600 ns
Number of Gates 2
On-State Resistance (Max) 280Ohm
High Level Output Current 25mA
Low Level Output Current 25mA
Multiplexer/Demultiplexer Circuit 2:4
Off-state Isolation-Nom 50 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 7.5pF
On-state Resistance Match-Nom 25Ohm
Switch Circuit DP4T
Channel-to-Channel Matching (ΔRon) 10 Ω
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+) 3V~18V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC14052BDG Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:4. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. A 5V voltage supply should turn on and run the electronic component. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on DP4T switching circuits. Try searching for MC14052B variants of the analog switch ic. It has an internal resistance of 1.05kOhm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. The 8 inputs need to be operated in order to work. It is possible to transfer data over a 17MHz-bandwidth.

MC14052BDG Features


4 Channels
Switch Circuit: DP4T
Bandwidth: 17MHz

MC14052BDG Applications


There are a lot of ON Semiconductor MC14052BDG Analog Switches & Multiplexers ICs applications.

  • Avionics test equipment
  • Central office
  • Cellular phones
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • High speed data transmission line cards
  • PDAs
  • Audio and video routing
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Battery-powered systems
  • Cable Telephony – NIU, Set-Top Box, Home Side Box

Write a review

Note: HTML is not translated!
    Bad           Good