MC14052BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MC14052B |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 10mA |
| Power Dissipation | 500mW |
| Propagation Delay | 325 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 600 ns |
| On-State Resistance (Max) | 280Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:4 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | DP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14052BDR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:4. Operational temperature extended around -55°C~125°C TA. There are 16 terminations totally. A 4 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. These analog multiplexers are built based on DP4T switching circuits. A total of 2 circuits make up this switch device. Using the MC14052B search parameter, you can discover variants of the switch. Analog switches have 1.05kOhm internal resistance. Datasheets for functions of 16 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Analogue multiplexers of the Dual supply type that are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 10mA. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. There are 8 inputs to be operated. 17MHz bandwidths enable data to be transferred.
MC14052BDR2G Features
4 Channels
Switch Circuit: DP4T
10mA Supply Current
Bandwidth: 17MHz
MC14052BDR2G Applications
There are a lot of ON Semiconductor MC14052BDR2G Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- T1/E1 Terminals
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio and video signal routing
- Central office
- Private Branch Exchange (PBX)
- RGB switches
- PBX interfaces
- Audio signal routing
- Switching Systems
