MC14052BDTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14052B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 600 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:4 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Switch Circuit | DP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 700ns |
| Switch-off Time-Max | 700ns |
| Voltage - Supply, Single (V+) | 3V~18V |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14052BDTR2 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:4. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. Electronic part bodies are injected with 16 pins. The analog switch ics are built using DP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching with MC14052B to find analog multiplexer variants. The internal resistance of this digital multiplexer is 280Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. Digital switch that provides Dual power at a cost-effective price. A low voltage of 3V should be applied to the electronic component. A voltage of 3V~18V is required for this switch device, which drains from a single voltage source. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. A 8 input needs to be operated. 17MHz-bandwidths can be used to transfer data between multiplexers.
MC14052BDTR2 Features
4 Channels
Switch Circuit: DP4T
Bandwidth: 17MHz
MC14052BDTR2 Applications
There are a lot of ON Semiconductor MC14052BDTR2 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Cell phones
- PBXs
- New designs requiring multiplexer functions
- High-Voltage
- USB 1.1 signal switching circuits
- Medical systems
- Audio/video switches
- Frame Relay Equipment
- ISDN NT1/TA
