MC14052BFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14052B |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 600 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:4 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | DP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14052BFELG Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:4 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. Total terminations are 16. By its 4 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on DP4T switching are used to construct these analog switch ics. A 2 circuit is present in this switch device. Try searching for MC14052B variants of the analog switch ic. There is 280Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 18V voltage to the switch device. An effective Dual supply digital multiplexer. A low voltage of 3V should be applied to the electronic component. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. There are 8 inputs to be operated. This switch operates within the bandwidth of 17MHz.
MC14052BFELG Features
4 Channels
Switch Circuit: DP4T
Bandwidth: 17MHz
MC14052BFELG Applications
There are a lot of ON Semiconductor MC14052BFELG Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- High speed data transmission line cards
- E1 Network Equipment
- Multi-Line E1 Interface Cards
- High reliability control systems
- SDH
- Automotive applications
- Private Branch Exchange (PBX)
- Automatic test equipment
- Residential Gateways, Home Gateway/Router
