MC14052BFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14052B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 600 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:4 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | DP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14052BFG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 2:4 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using DP4T switching circuits. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with MC14052B. There is 280Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Analog switch ics with Dual supply type are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. It is possible to operate 8 inputs. 17MHz bandwidths enable data to be transferred.
MC14052BFG Features
4 Channels
Switch Circuit: DP4T
Bandwidth: 17MHz
MC14052BFG Applications
There are a lot of ON Semiconductor MC14052BFG Analog Switches & Multiplexers ICs applications.
- Communication systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio signal routing
- SDH/SONET multiplexers
- Fault Tolerant Systems
- Data Acquisition Systems
- Video switching
- Isolation
- Cross Connects
- Channelized and Unchannelized DS3 applications
