MC14053BD

SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14053B 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC14053BD
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 302
Description: SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14053B 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	280Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MC14053B
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Power Dissipation	500mW
Propagation Delay	65 ns
Turn On Delay Time	550 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Dual
Bandwidth	17MHz
Turn-Off Delay Time	550 ns
On-State Resistance (Max)	280Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	70Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	700ns
Switch-off Time-Max	700ns
Voltage - Supply, Single (V+)	3V~18V
Signal Current-Max	0.025A
Height	1.5mm
Length	10mm
Width	4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MC14053BD Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 16 series that this electronic component is included. Multiplexers built on a SPDT switching circuit are built. A 3 circuit is present in this switch device. Try searching for MC14053B variants of the analog switch ic. An switch multiplexer with 280Ohm internal resistance has a value of 280Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 18V. Analogue multiplexers of the Dual supply type that are cost-effective. There should be 3V voltage fed to the electrical part below 3V. Draining from a single voltage supply, this analog switch requires a voltage of 3V~18V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. It is possible to operate 6 inputs. There are various bandwidths available for data transfer.