MC14053BDG
| Parameters | |
|---|---|
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 15nA |
| Power Dissipation | 500mW |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| Number of Gates | 3 |
| On-State Resistance (Max) | 280Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MC14053BDG Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. As a result of its 2 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with MC14053B. In this multiplexer, the internal resistance is 1.05kOhm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 18V. Digital switch that provides Dual power at a cost-effective price. 3V is the lowest voltage that should be fed to the electronic electronic part. Using only a single voltage supply, this analog switch requires 3V~18V voltage. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. It is possible to operate 6 inputs. The data can be transferred over a wide range of bandwidths, called 17MHz bandwidths.
MC14053BDG Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BDG Applications
There are a lot of ON Semiconductor MC14053BDG Analog Switches & Multiplexers ICs applications.
- DSUs
- Sample-and-hold systems
- E1 Network Equipment
- Multiplexers
- Sample hold systems
- Fiber to the Home
- Relay replacements
- DSLAMs
- PCMCIA cards
- SDH
