MC14053BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 280Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 6 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| On-State Resistance (Max) | 280Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height | 1.4986mm |
| Length | 9.9822mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14053BDR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. A high-quality output is provided by the electrical component's 2 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Circuits based on SPDT switching are used to construct these analog switch ics. The multiplexer consists of 3 circuits. If you are looking for variants of the digital switch, trying search with MC14053B. This digital multiplexer has 280Ohm internal resistance. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 18V in normal situations. The digital multiplexer has a low cost Dual supply. 3V should be the lowest voltage fed to the electronic component. The voltage required by this switch device is 3V~18V, draining from a single voltage supply. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Among the inputs that can be operated are the 6 inputs. It is possible to transfer data over a 17MHz-bandwidth.
MC14053BDR2G Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BDR2G Applications
There are a lot of ON Semiconductor MC14053BDR2G Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Communications systems
- FTTH
- Battery-powered systems
- SONET
- Audio and video switching
- PBX interfaces
- Imaging
- New designs requiring multiplexer functions
- 65 V DACs
