MC14053BDTR2
| Parameters | |
|---|---|
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 700ns |
| Switch-off Time-Max | 700ns |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
MC14053BDTR2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -55°C~125°C TA. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 3 circuits in this switch device. MC14053B can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 280Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 18V to a switch device. A analog switch ic that has a cost-effective Dual supply type. It is recommended to use 3V as the lowest voltage for the electrical part. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. It is possible to operate 6 inputs. The data can be transferred over a wide range of bandwidths, called 17MHz bandwidths.
MC14053BDTR2 Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BDTR2 Applications
There are a lot of ON Semiconductor MC14053BDTR2 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Optical Applications
- DSLAMs
- New designs requiring multiplexer functions
- Frame Relay Equipment
- Fault Tolerant Systems
- Cellular phones
- Public switching systems
- Battery Powered Systems
- Fiber to the Home
