MC14053BDTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 500Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 15nA |
| Power Dissipation | 500mW |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 6 |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| On-State Resistance (Max) | 280Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14053BDTR2G Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature extended to -55°C~125°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 3 make up this analogue multiplexer. Try searching for the analog switch ic with MC14053B if you are looking for variants. A 500Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. Analogue multiplexers of the Dual supply type that are cost-effective. There should be 3V voltage fed to the electrical part below 3V. An analogue multiplexer drains from a single voltage supply at 3V~18V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In order to operate the 6 inputs, there are several steps to follow. 17MHz-bandwidths can be used to transfer data between multiplexers.
MC14053BDTR2G Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BDTR2G Applications
There are a lot of ON Semiconductor MC14053BDTR2G Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Digital cross connects (DSX-1)
- DVD-R
- PDH Multiplexers
- Voice over IP/DSL – Integrated Access Devices, Smart
- SONET
- Relay replacements
- USB 1.1 signal switching circuits
- DSLAMs
- Intelligent PBX
