MC14053BF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 700ns |
| Switch-off Time-Max | 700ns |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14053BF Overview
This electronic part is conveniently packaged in 16-SOIC (0.209, 5.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. A 2 channel electronic part produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. SPDT switching circuits are used in these analog switch ics. A total of 3 circuits make up this switch device. Using the MC14053B search parameter, you can discover variants of the switch. There is 280Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. A analog switch ic that has a cost-effective Dual supply type. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. 18V operating voltages can be used with this electrical part. A 17MHz-bandwidth can be used for data transfer.
MC14053BF Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BF Applications
There are a lot of ON Semiconductor MC14053BF Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Transmit
- Microwave transmission systems
- Ultrasound
- FTTH
- Data switching
- PDH Multiplexers
- SDH
- Cell phones
- New designs requiring multiplexer functions
