MC14053BFEL
| Parameters | |
|---|---|
| Base Part Number | MC14053B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 550 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 550 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 700ns |
| Switch-off Time-Max | 700ns |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MC14053BFEL Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. In total, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. SPDT switching circuits are used in these analog switch ics. This multiplexer is composed of 3 circuits. Try searching for the analog switch ic with MC14053B if you are looking for variants. In this multiplexer, the internal resistance is 280Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 18V. An effective Dual supply digital multiplexer. The lowest voltage fed to the electronic component should be 3V. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. A 6 input needs to be operated. This switch operates within the bandwidth of 17MHz.
MC14053BFEL Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
MC14053BFEL Applications
There are a lot of ON Semiconductor MC14053BFEL Analog Switches & Multiplexers ICs applications.
- Central office
- Audio and video signal routing
- Transmit
- Power routing
- PDH Multiplexers
- Microprocessor controlled systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cable PC
- Switching Systems
- Audio signal routing
