MC14066BDG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 280Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4066 |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Nominal Supply Current | 15mA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 120 ns |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 65MHz |
| Turn-Off Delay Time | 80 ns |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 25Ohm |
| Drain to Source Resistance | 250Ohm |
| Normal Position | NO |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14066BDG Overview
Digital switch is provided in the 14-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.Tube is the packaging method.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Bilateral, FET Switches.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 3V~18V, designers have greater flexibility of digital controlled switch.Several applications are possible for 4000B series multiplexers.Its basic configuration includes terminations in the 14 range.In addition, it also has a base part number of 4066, which can be used to find related parts.The multiplexer's system is powered by 5V voltage.There are 14 component pins in this turn signal switch.A conductor terminates at GULL WING.Dual is employed as its supply type.With 14 pins, it is configured.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 18V in order to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5/15V.The digital switch ic is a part of an electronic system classified as Multiplexer or Switches.With a resistance of 280Ohm, it operates.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.In order for the digitalswitch to function normally, it has 4 circuits.
MC14066BDG Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
MC14066BDG Applications
There are a lot of ON Semiconductor MC14066BDG Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- CPU memory location identification
- PCIe
- Idle motor
- Metal detectors
- Make full adder
- Microprocessor instruction decoding
- RF-based home automation system
- Medical industry
- Steel plants
