Parameters |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
4000B |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Bilateral, FET Switches |
Resistance |
1.05kOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Voltage - Supply |
3V~18V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
4066 |
Pin Count |
14 |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
18V |
Power Supplies |
5/15V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
4 |
Nominal Supply Current |
15nA |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
120 ns |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
65MHz |
Turn-Off Delay Time |
80 ns |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Off-state Isolation-Nom |
50 dB |
Voltage Supply Source |
Dual Supply |
On-state Resistance Match-Nom |
25Ohm |
Normal Position |
NO |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
MC14066BDR2G Overview
In order to conserve board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Bilateral, FET Switches.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.Multiplexers in the 4000B series are suitable for a wide range of applications.As parts of its basic configuration, 14 terminations are desgined.The base part number is 4066, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.There are 14 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.Dual is used as its supply type.With 14 pins, it is configured.Vsup should be kept at 3V to prevent some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 18V.There is a power supply provided for the mux switch's normal operation of 5/15V.This is an the digital switch ic that is classified as Multiplexer or Switches.This signal switching operates at a resistance of 1.05kOhm.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
MC14066BDR2G Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
MC14066BDR2G Applications
There are a lot of ON Semiconductor MC14066BDR2G Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- To select different task for memory in microprocessor memory systems
- Communication system
- Computer memory
- Automatic health monitoring systems
- Medical industry
- Logic gates for other digital devices
- Speed synchronization of multiple motors in industries
- Electronic circuits
- Data collection system