MC14066BDTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 120 ns |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Bandwidth | 65MHz |
| Turn-Off Delay Time | 80 ns |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 25Ohm |
| Normal Position | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14066BDTR2 Overview
Providing this information in the 14-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bilateral, FET Switches.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 3V~18V, designers have greater flexibility of digital controlled switch.Several applications are possible for 4000B series multiplexers.There is a design for terminating 14 as part of its basic configuration.In addition, it also has a base part number of 4066, which can be used to find related parts.The multiplexer is supplied with 5V voltage.There are 14 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.Dual is used as its supply type.Currently, it is configured with a 14 pin configuration.The mount is in Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 18V.Normally, 5/15V is powered by a battery.This is an the digital switch ic that is classified as Multiplexer or Switches.In this multiplexer, there is a total of 4 inputs.In terms of resistance, it has a value of 1.05kOhm.The turn signal switch's circuit consists of 1 transmission channels.
MC14066BDTR2 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
MC14066BDTR2 Applications
There are a lot of ON Semiconductor MC14066BDTR2 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Electronic circuits
- Computer memory
- Speed control of medern motors
- Signal router
- A robotic vehicle with the metal detector
- Make full adder
- VGA
- To select different devices in microprocessor output
- PCIe
