Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
4000B |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Type |
Bilateral, FET Switches |
Resistance |
1.05kOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Voltage - Supply |
3V~18V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
18V |
Power Supplies |
5/15V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
1 |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Propagation Delay |
40 ns |
Turn On Delay Time |
120 ns |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
65MHz |
Turn-Off Delay Time |
80 ns |
Off-state Isolation-Nom |
50 dB |
Voltage Supply Source |
Dual Supply |
On-state Resistance Match-Nom |
25Ohm |
Normal Position |
NO |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC14066BDTR2G Overview
In order to conserve board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Bilateral, FET Switches as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When operated with a 3V~18V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 4000B series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 14 terminations.The base part number is 4066, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.A component pin count of 14 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Dual is used as its supply type.Currently, it is configured with a 14 pin configuration.Keep Vsup at 3V to avoid unnecessary failures.The maximal supply voltage (Vsup) should be kept at 18V to avoid some unnecessary failures.Normally, 5/15V is powered by a battery.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.In this multiplexer, there is a total of 4 inputs.A resistance of 1.05kOhm is used to operate the signal switching.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.
MC14066BDTR2G Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
MC14066BDTR2G Applications
There are a lot of ON Semiconductor MC14066BDTR2G Signal Switches / Multiplexers / Decoders applications.
- Image transmission
- Arithmetic Logic Units
- Frequency multiplexing system
- Enabling different functions units in microprocessor instruction decoding
- Automatic Monitoring systems
- Analog to digital conversion
- GLAN
- Memory system of computers
- Data distribution
- Enabling block of memory depending on address in memory chips