MC14066BFEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 120 ns |
| Supply Type | Dual |
| Bandwidth | 65MHz |
| Turn-Off Delay Time | 80 ns |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 25Ohm |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14066BFEL Overview
It is included in the 14-SOIC (0.209, 5.30mm Width) in order to save board space.It is packaged according to the Tape & Reel (TR) method.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Bilateral, FET Switches as the analog part of the circuit.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.When operated with a 3V~18V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 4000B series can be used in a wide range of applications.As parts of its basic configuration, 14 terminations are desgined.As its base part number is 4066, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 14 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Dual.This multiplexer ic is configured with 14 pins.The mounting point is Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.For mux switch's normal operation, power supply 5/15V is provided.Multiplexer or Switches is the classification for this the digital switch ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 18V is provided.The resistance of the signal switching is 1.05kOhm.Transmission is carried out over 4 channels in the turn signal switch's circuit.
MC14066BFEL Features
Supplied in the 14-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
Operating with the supply voltage of 18V
MC14066BFEL Applications
There are a lot of ON Semiconductor MC14066BFEL Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Audio transmission
- Memory chips
- Night vision cameras
- Electronic circuits
- Home automation system
- HD surveillance system
- Analog, digital or video signal switching
- Steel plants
- Relay
