MC14066BFELG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 360nA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 120 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Bandwidth | 65MHz |
| Turn-Off Delay Time | 80 ns |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 25Ohm |
| Normal Position | NO |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14066BFELG Overview
As a means of saving space, digital switch is provided in the 14-SOIC (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bilateral, FET Switches is used.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.With a supply voltage of 3V~18V, designers have greater flexibility of digital controlled switch.Multiplexers in the 4000B series are suitable for a wide range of applications.There are 14 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 4066.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 14 components that can be connected to each pin.As a result, conductors end at GULL WING.Its supply type is Dual, which is used as the source of power.A total of 14 pins are configured on this board.Keep Vsup at 3V to avoid unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 18V.During mux switch's normal operation, 5/15V is provided with a power supply.This multiplexer provides 4 inputs.The resistance of the signal switching is 280Ohm.For transmission, there are 1 channels in the turn signal switch's circuit.When 360nA is delivered to the load, stability of the multiplexers can be maintained.
MC14066BFELG Features
Supplied in the 14-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
Operating with the supply current of 360nA
MC14066BFELG Applications
There are a lot of ON Semiconductor MC14066BFELG Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Control unit of Central Processing unit (CPU)
- Analog to digital conversion
- HD surveillance system
- Textile mills
- Paper plants
- D/A converters
- To select different task for memory in microprocessor memory systems
- Computer memory
- Combinational circuit
