MC14067BCP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 280Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC14067B |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Polarity | Non-Inverting |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual |
| Bandwidth | 15MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 625 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 100pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14067BCP Overview
The electronic component is convenient to ship overseas because it is packed in a 24-DIP (0.600, 15.24mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. Total terminations are 24. This electronic part offers high-quality output due to its 16 channels. An 5V voltage supply should allow the electrical part to be turned on and run. 24 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. Try searching for the analog switch ic with MC14067B if you are looking for variants. It has an internal resistance of 280Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. The analogue multiplexer could operate on 360nA current. The voltage required by this switch device is 3V~18V, draining from a single voltage supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The electronic component can function from 18V. The data can be transferred over a wide range of bandwidths, called 15MHz bandwidths.
MC14067BCP Features
16 Channels
360nA Supply Current
Bandwidth: 15MHz
MC14067BCP Applications
There are a lot of ON Semiconductor MC14067BCP Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Avionics test equipment
- Industrial and process control systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- ISDN NT1/TA
- Precision test equipment
- Routers
- Low-Voltage
- MP3 players
- Industrial control systems
