MC14067BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 280Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14067B |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Power Dissipation | 500mW |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Bandwidth | 15MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 625 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 100pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14067BCPG Overview
The electronic component is convenient to ship overseas because it is packed in a 24-DIP (0.600, 15.24mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -55°C~125°C TA. A total of 24 terminations have been recorded. A electrical component with 16 channels is capable of high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 24 pins injected into the electronic part body. A 1 circuit is present in this switch device. Search with MC14067B if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 280Ohm. Please refer to the datasheets for 24 pins functions. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Analogue multiplexers of the Dual supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. It would be sufficient to run this analogue multiplexer with 360nA current. Using only a single voltage supply, this analog switch requires 3V~18V voltage. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A 16 input needs to be operated. It is possible to transfer data over a 15MHz-bandwidth.
MC14067BCPG Features
16 Channels
360nA Supply Current
Bandwidth: 15MHz
MC14067BCPG Applications
There are a lot of ON Semiconductor MC14067BCPG Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Precision instrumentation
- Central office
- Communication systems
- High speed data transmission line cards
- Multi-Line E1 Interface Cards
- Fault Tolerant Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery-powered systems
- Medical Instrumentation
