Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
Resistance |
280Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC14067B |
Pin Count |
24 |
Number of Channels |
16 |
Number of Circuits |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
360nA |
Power Dissipation |
500mW |
Propagation Delay |
90 ns |
Turn On Delay Time |
600 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
16 |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
15MHz |
Supply Current-Max (Isup) |
0.6mA |
Turn-Off Delay Time |
625 ns |
On-State Resistance (Max) |
280Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
100pF |
On-state Resistance Match-Nom |
25Ohm |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Voltage - Supply, Single (V+) |
3V~18V |
Signal Current-Max |
0.025A |
Height Seated (Max) |
2.65mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC14067BDWR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Temperatures around -55°C~125°C TA are extended for operation. A total of 24 terminations have been recorded. A high-quality output is provided by the electrical component's 16 channels. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 24 series. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MC14067B. An switch multiplexer with 280Ohm internal resistance has a value of 280Ohm. For details about the functions of 24 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 18V. A cost-effective Dual supply type analogue multiplexer. 3V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 360nA. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A 16 input needs to be operated. This switch operates within the bandwidth of 15MHz.
MC14067BDWR2G Features
16 Channels
360nA Supply Current
Bandwidth: 15MHz
MC14067BDWR2G Applications
There are a lot of ON Semiconductor MC14067BDWR2G Analog Switches & Multiplexers ICs applications.
- CSU
- Audio and video signal routing
- Optical Applications
- Isolation
- Frame Relay Equipment
- PBXs
- Data Acquisition Systems
- Access Concentrators
- MP3 players
- Digital access cross connects