MC14076BCP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 12MHz |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 600 ns |
| fmax-Min | 6 MHz |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MC14076BCP Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. It is included in the package Tube. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Through Hole. Powered by a 3V~18Vvolt supply, it operates as follows. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. A frequency of 12MHzshould be the maximum output frequency. A total of 1elements are contained within it. There have been 16 terminations. Power is supplied from a voltage of 5V volts. A normal operating voltage (Vsup) should remain above 3V.
MC14076BCP Features
Tube package
4000B series
MC14076BCP Applications
There are a lot of Rochester Electronics, LLC MC14076BCP Flip Flops applications.
- Count Modes
- Differential Individual
- Clock pulse
- Test & Measurement
- Memory
- Safety Clamp
- Single Down Count-Control Line
- Registers
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
