Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Published |
2010 |
Series |
4000B |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Subcategory |
FF/Latches |
Packing Method |
RAIL |
Technology |
CMOS |
Voltage - Supply |
3V~18V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
4099 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
Standard |
Operating Supply Voltage |
15V |
Circuit |
4:4 |
Polarity |
Non-Inverting |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
2 |
Load Capacitance |
50pF |
Power Dissipation |
500mW |
Output Current |
10mA |
Number of Bits |
8 |
Propagation Delay |
100 ns |
Quiescent Current |
15mA |
Turn On Delay Time |
50 ns |
Logic Function |
D-Type, Shift Register |
Current - Output High, Low |
8.8mA 8.8mA |
Logic Type |
D-Type, Addressable |
Prop. Delay@Nom-Sup |
400 ns |
Trigger Type |
LOW LEVEL |
Number of Input Lines |
1 |
Height |
3.43mm |
Length |
19.55mm |
Width |
6.85mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC14099BCP Overview
There is an embedded version of it in package 16-DIP (0.300, 7.62mm). Tube is the way in which it is packaged. In its configuration, Standard is used as the output. There is a logic type of D-Type, Addressable for this electrical device. Based on the way of Through Hole, this electronic part is mounted. A 3V~18V voltage supply is required for operation. A temperature of -55°C~125°C is set as the operating temperature. 4000B is the series number of this FPGA. With this electronic part, there are 8 bits. This device is designed with 16 terminations. 4099 is the family name of it. The device works with a voltage of 5V for its supply voltage. 16 pins are available on it. 16 pins are used in its design. Mounting this electronic component follows the Through Hole method. FF/Latches is the subcategory of this part. A supply voltage (Vsup) greater than 3V is required. There are 1 input lines in which electronic circuits are present. Based on its reliable performance, this device is well suited to RAIL. As the output current is 10mA, the design flexibility is maximum. Optimal efficiency requires 15V as the supply voltage. It consumes 15mA of quiescent current without being affected by external factors. 2 circuits are used to provide this superior level of flexibility.
MC14099BCP Features
16-DIP (0.300, 7.62mm) package
4000B series
8 Bits
4099 family
16 pin count
16 pins
MC14099BCP Applications
There are a lot of ON Semiconductor MC14099BCP Latches applications.
- Meter applications
- A/D and D/A conversion
- Control circuits
- Bus system register with enable parallel lines at bus side
- Accumulator Registers
- Programmable binary
- Shift left with parallel loading
- Parallel Input
- Decade counting 7-segment decimal display
- Pattern Generators