MC14174BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Current Rating | 2.25μA |
| Base Part Number | 4174 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Number of Bits | 6 |
| Clock Frequency | 15.5MHz |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 3.43mm |
| Length | 19.55mm |
| Width | 6.85mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14174BCPG Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. Package Tubeembeds it. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 3V~18V. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 4000B series. It should not exceed 15.5MHzin its output frequency. D latch consists of 1 elements. It consumes 20μA of quiescent Currently, there are 16 terminations. The 4174 family contains it. A voltage of 5V provides power to the D latch. This JK flip flop has a 5pFfarad input capacitance. The electronic part is mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 6bits. Normally, the supply voltage (Vsup) should be above 3V. The superior flexibility is achieved through the use of 7 circuits. As a result of its reliable performance, this T flip flop is suitable for RAIL. The output current of 8.8mA makes it feature maximum design flexibility. This input has 6lines in it.
MC14174BCPG Features
Tube package
4000B series
16 pins
6 Bits
MC14174BCPG Applications
There are a lot of ON Semiconductor MC14174BCPG Flip Flops applications.
- QML qualified product
- Pattern generators
- Control circuits
- Synchronous counter
- Dynamic threshold performance
- Common Clocks
- Modulo – n – counter
- Bus hold
- Storage registers
- ATE
