MC14175BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Current Rating | 2.25μA |
| Base Part Number | 4175 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 3.429mm |
| Length | 19.5326mm |
| Width | 6.858mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14175BCPG Overview
16-DIP (0.300, 7.62mm)is the packaging method. D flip flop is embedded in the Tube package. It is configured with Differentialas an output. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 3V~18V. A temperature of -55°C~125°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 4000B series. There should be no greater frequency than 14MHzon its output. In total, there are 1 elements. This process consumes 20μA quiescents. A total of 16 terminations have been made. D latch belongs to the 4175 family. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 5pFfarad input capacitance is used here. There is an electronic part mounted in the way of Through Hole. A total of 16pins are provided on this board. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. The design is based on 4bits. Normally, the supply voltage (Vsup) should be kept above 3V. Its superior flexibility is attributed to its use of 4 circuits. It offers maximum design flexibility with its output current of 8.8mA.
MC14175BCPG Features
Tube package
4000B series
16 pins
4 Bits
MC14175BCPG Applications
There are a lot of ON Semiconductor MC14175BCPG Flip Flops applications.
- Dynamic threshold performance
- Asynchronous counter
- Data storage
- Frequency division
- Bus hold
- Single Down Count-Control Line
- Control circuits
- Bounce elimination switch
- Count Modes
- Clock pulse
