MC14175BDG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 2.25μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4175 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 400 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14175BDG Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is included in the package Tube. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 3V~18V. In the operating environment, the temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 4000B series. In order for it to function properly, its output frequency should not exceed 14MHz. A total of 1elements are present in it. This process consumes 20μA quiescents. A total of 16 terminations have been made. The 4175 family contains it. A voltage of 5V is used to power it. Its input capacitance is 5pF farads. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 4bits. For normal operation, the supply voltage (Vsup) should be above 3V. In order to achieve its superior flexibility, 4 circuits are used. With a current output of 8.8mA , it offers maximum design flexibility.
MC14175BDG Features
Tube package
4000B series
16 pins
4 Bits
MC14175BDG Applications
There are a lot of ON Semiconductor MC14175BDG Flip Flops applications.
- ESCC
- Set-reset capability
- High Performance Logic for test systems
- Consumer
- Instrumentation
- Patented noise
- 2 – Bit synchronous counter
- Balanced Propagation Delays
- Bounce elimination switch
- Count Modes
