MC14175BFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4175 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 400 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14175BFELG Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 3V~18Vvolts. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 4000B series. There should be no greater frequency than 14MHzon its output. A total of 1elements are present in it. This process consumes 20μA quiescents. Currently, there are 16 terminations. Members of the 4175family make up this object. An input voltage of 5Vpowers the D latch. Its input capacitance is 5pFfarads. This electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. 4bits are used in its design. For normal operation, the supply voltage (Vsup) should be kept above 3V. 4 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL.
MC14175BFELG Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
MC14175BFELG Applications
There are a lot of ON Semiconductor MC14175BFELG Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Parallel data storage
- Single Up Count-Control Line
- Bounce elimination switch
- Common Clocks
- Pattern generators
- Consumer
- Balanced Propagation Delays
- Count Modes
- Frequency Divider circuits
