MC14503BDR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 500mW |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 6 |
| Propagation Delay | 50 ns |
| Quiescent Current | 6nA |
| Family | 4000/14000/40000 |
| Logic Function | Buffer, Inverting |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 25mA |
| Low Level Output Current | 14.1mA |
| Control Type | ENABLE LOW |
| Number of Input Lines | 6 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC14503BDR2 Overview
Logical driver uses a neat SOIC package. All of the 2 elements are put into use. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the 4000/14000/40000 family. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 6nA. It is recommended to use a 5/15V power supply. It is generally sold in TAPE AND REEL package. 6 bits are included within the electrical component. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 14.1mA to its low level. In high level output mode, the electronic parts may conduct 25mA of current. Voltage used to run voltage buffer should be 3V at least. In regard to the maximum supply voltage, buffer driver is rated 18V. Wireless transceiver is able to output 3 lines. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals. It is known as a BUS DRIVER logic IC.
MC14503BDR2 Features
Bus Driver/Transceivers
High Level Output: 14.1mA
Low Level Output: 25mA
BUS DRIVER Logic IC
MC14503BDR2 Applications
There are a lot of ON Semiconductor MC14503BDR2 Buffers & Transceivers applications.
- Televisions
- Relays
- Cordless telephone
- Remote controls
- Wireless network systems
- Wireless modems
- Cable network front end
- Car radio
- Wireless transmission
- Wireless teaching
