MC14520BDWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4520 |
| Pin Count | 16 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 650 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Number of Gates | 2 |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Number of Input Lines | 1 |
| Count Rate | 8MHz |
| Timing | Synchronous |
| Height | 2.4mm |
| Length | 10.45mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14520BDWG Overview
A 16-SOIC (0.295, 7.50mm Width)package is used for this device. The configuration of this device is based on 16terminations. This device is fully flexible due to the supply voltage of [0]. A total of 16pins are available on all components. Packaging is based on Tube. There are 16 pins going on to connect other parts in the circuit. It is mounted in the direction of [0]. Due to its membership in the 4000Bseries, it is suitable for a variety of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to -55°C~125°C. There is a mounting type of Surface Mounton this device. In the presence of the supply voltage of [0], it can operate more reliably. The array stores 4bits in each element. In terms of Pbfree code, the result may be yes. Further related parts may be found under the base part number 4520. There is a minimum supply voltage (Vsup) of 3V volts. Input binary data is made by using the 1input lines.
MC14520BDWG Features
Embedded in the 16-SOIC (0.295, 7.50mm Width) package
4 bits per element
MC14520BDWG Applications
There are a lot of ON Semiconductor MC14520BDWG Counters & Dividers applications.
- Signal gating
- MULTIPLICATION
- Fixed and programmable counters greater than 10
- Divide-by-N counting
- Control counters
- Communications Digital Frequency Synthesizers;
- Binary counter/decoder
- SQUARING
- POWER COMPUTATION
- DIVISION
