MC14551BCPG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.05kOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MC14551B |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Nominal Supply Current | 15nA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Propagation Delay | 90 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 17MHz |
| Number of Gates | 4 |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Voltage - Supply, Single (V+) | 3V~18V |
| Drain to Source Resistance | 80Ohm |
| Height | 3.43mm |
| Length | 19.55mm |
| Width | 6.85mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14551BCPG Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Through Hole. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -55°C~125°C TA. In total, there have been 16 terminations. As a result of its 2 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPDT switching circuits. Look for analog switch ic variants by searching with MC14551B. As far as internal resistance is concerned, it has 1.05kOhm. The functions of 16 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 18V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 3V. This digital switch can be operated with a current of 360nA. The voltage required by this switch device is 3V~18V, draining from a single voltage supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It is possible to operate 8 inputs. In 17MHz-bandwidths, data can be transferred. Resistivity from Drain to Source is 80Ohm for this electronic part.
MC14551BCPG Features
2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz
Drain-to-Source resistance: 80Ohm
MC14551BCPG Applications
There are a lot of ON Semiconductor MC14551BCPG Analog Switches & Multiplexers ICs applications.
- Data switching
- Private Branch Exchange (PBX)
- Microprocessor controlled systems
- Low-Voltage
- Voice over IP/DSL – Integrated Access Devices, Smart
- USB 1.1 signal switching circuits
- RGB switches
- High speed data transmission line cards
- Multiplexers
- Public switching systems
