Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
1.05kOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC14551B |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
5/15V |
Number of Channels |
2 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
360nA |
Nominal Supply Current |
15nA |
Power Dissipation |
500mW |
Throw Configuration |
DPST |
Propagation Delay |
90 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
17MHz |
Number of Gates |
4 |
On-State Resistance (Max) |
280Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
25Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Voltage - Supply, Single (V+) |
3V~18V |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC14551BDG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component of this type can be found in the 16 series. A SPDT switching circuit is used for these analog switches. Try searching for the analog switch ic with MC14551B if you are looking for variants. A 1.05kOhm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. Dual supply type digital switch with a low cost. 3V should be the lowest voltage fed to the electronic component. 360nA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 8 inputs is required. It is possible to transfer data over a 17MHz-bandwidth.
MC14551BDG Features
2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz
MC14551BDG Applications
There are a lot of ON Semiconductor MC14551BDG Analog Switches & Multiplexers ICs applications.
- Imaging
- Private Branch Exchange (PBX)
- E1 Network Equipment
- Remote Powered Equipment
- High-Voltage
- DVD-R
- Voice over IP/DSL – Integrated Access Devices, Smart
- T1/E1 Terminals
- SDH
- Sample-and-hold systems