MC14551BF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14551B |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Throw Configuration | DPST |
| Propagation Delay | 30 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 875ns |
| Switch-off Time-Max | 875ns |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14551BF Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. 16 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. The analog switch ics are built using SPDT switching circuits. The circuits in this analogue multiplexer number 4. Search with MC14551B if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 280Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. Digital switch that provides Dual power at a cost-effective price. This multiplexer would work with 360nA current. Using only a single voltage supply, this analog switch requires 3V~18V voltage. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages range from 18V. The data can be transferred over a wide range of bandwidths, called 17MHz bandwidths.
MC14551BF Features
2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz
MC14551BF Applications
There are a lot of ON Semiconductor MC14551BF Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- RGB switches
- Channelized and Unchannelized DS3 applications
- Precision test equipment
- E1 Multiplexer
- Fiber In The Loop (FITL)
- PDAs
- Low-Voltage
- Intelligent PBX
- SDH
