MC14551BFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14551B |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 360nA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Propagation Delay | 90 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14551BFELG Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around -55°C~125°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 2 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 16 series that this electronic component is included. A SPDT switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. Try searching for MC14551B variants of the analog switch ic. A 280Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 18V. Digital switch that provides Dual power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 3V. This digital switch can be operated with a current of 360nA. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 8 inputs, there are several steps to follow. There are 17MHz bandwidths for data transfer.
MC14551BFELG Features
2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz
MC14551BFELG Applications
There are a lot of ON Semiconductor MC14551BFELG Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Low-Voltage
- Avionics and Military Systems
- Channelized and Unchannelized DS3 applications
- Precision test equipment
- Industrial
- T1/E1 Terminals
- Ultrasound
- Automotive applications
- Signal routing between systems
