MC14556BDR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4556 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | 4PST |
| Propagation Delay | 440 ns |
| Quiescent Current | 20μA |
| Number of Inputs | 2 |
| Current - Output High, Low | 8.8mA 8.8mA |
| Supply Type | Dual |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14556BDR2 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Decoder/Demultiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.A supply voltage of 3V~18V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 4556, which can be used to find related parts.The multiplexer's system is powered by 5V volts.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Dual, which is used as the source of power.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 18V so as to avoid some unnecessary failures.Normally, 5/15V is powered by a battery.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.In the absence of external influences, it consumes 20μA current of multiplexer ic.The multiplexer provides 2 inputs.The switches package is packaged in accordance with TAPE AND REEL.
MC14556BDR2 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
Power supplies of 5/15V
MC14556BDR2 Applications
There are a lot of ON Semiconductor MC14556BDR2 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Used to connect a single source to multiple destinations
- Seven segment displays
- Image transmission
- Data collection system
- Data distribution
- Signal router
- Speed control of medern motors
- Microprocessor instruction decoding
- Data-routing applications
