MC1458DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | MC1458 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 3.4mA |
| Nominal Supply Current | 5.6mA |
| Output Current | 25mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC1458DRE4 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Op amp rates 6mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.4mA and 10 . The voltage gain should stay at 106.02dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 15V. It is used TR to pack the op amps.
MC1458DRE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
MC1458DRE4 Applications
There are a lot of Texas Instruments MC1458DRE4 Instrumentational OP Amps applications.
- Computer workstations
- Inverse/same-phase proportional circuit
- Communication
- Division circuits
- Vehicle electronics
- Fast A/D and D/A converters
- Subtraction operation circuits
- Exponential operation circuits
- High/low-pass filter circuit
- Image computer boards
