MC14598BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4598 |
| Pin Count | 18 |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 3 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 400 ns |
| Quiescent Current | 15nA |
| Turn On Delay Time | 100 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | HIGH LEVEL |
| Number of Input Lines | 1 |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14598BCPG Overview
The package in which it is embedded is named 18-DIP (0.300, 7.62mm). It is packaged in the way of Tube. It is configured with an output of Standard. The Logic type of this electrical device is D-Type, Addressable. A Through Hole mount is used for mounting this electronic part. A 3V~18V voltage supply is required for operation. There is -55°C~125°C operating temperature. There are a number of FPGAs in this series, including this one. This electronic part is designed with 8 Bits. There are 18 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 4598 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. 18 pins are available on it. Designed with 18 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Through Hole method. Subcategory FF/Latches contains this part. It is recommended that the supply voltage (Vsup) be greater than 3V. It contains 1 input lines where electronic circuits are present. The quiescent current consumed by it is 15nA because it is unaffected by external factors. 3 circuits are used to achieve superior flexibility.
MC14598BCPG Features
18-DIP (0.300, 7.62mm) package
4000B series
8 Bits
4598 family
18 pin count
18 pins
MC14598BCPG Applications
There are a lot of ON Semiconductor MC14598BCPG Latches applications.
- Relay
- Automotive HEV/EV Powertrain
- Ring counter
- Storage
- Up/down difference counting
- Programmable binary
- Parallel data synchronization
- Automotive Infotainment
- Meter applications
- Phase comparator
