MC33025DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | CAN BE OPERATED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33025 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 5.15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Max Supply Current | 35mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 45 % |
| Duty Cycle | 45% |
| Output Isolation | Isolated |
| Voltage - Start Up | 9.2V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33025DWG Overview
This ac to dc converter is embedded in package 16-SOIC (0.295, 7.50mm Width) .In Tube case, the ac dc converter is available.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~105°C TA °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 8.4V~30V (Vcc/Vdd).There are a total of 16 terminations in it.In this ac/dc converter, there are 16 pins.The ac-dc converter has 16 pins.Surface Mount are the recommended mounting method for the ac dc converters.If you select the MC33025 family, you will be able to search similar acdc converters.AC to DC converter is necessary to run 2 outputs.Switching Regulator or Controllers includes the ac to dc conversions.AC to DC converter is set to 500mA for the output current.There is 5.15V voltage output from it.AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 30V .Also, CAN BE OPERATED IN CURRENT MODE can be found using this ACDC converter.Supply currents up to 35mA can be handled by this power AC DC.
MC33025DWG Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
With 16 pins
Output Current at 500mA
MC33025DWG Applications
There are a lot of ON Semiconductor MC33025DWG AC DC Converters applications.
- Small off-line low voltage power supplies
- Set -Top Box (STB) Power Supply
- Power Adaptors
- Air conditioners
- Charger
- Battery chargers for media tablets
- Shaver Charger
- AC/DC LED Driver applications
- AC/DC Adaptors/Chargers for Cordless Phone
- Standby Power Supplies
