MC3303DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MC3303 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Power Supplies | +-2.5/+-15/5/30V |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 7mA |
| Output Current | 30mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 8mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC3303DR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 14V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 14 pins on it. The input offset voltage is 10mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 2.8mA, this op amp ic can operate. Voltage gain should remain at 106.02dB. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. For the packing of the instrumentation amplifier, TR is adopted.
MC3303DR Features
14 Pins
supply voltage of 14V
106.02dB voltage gain
MC3303DR Applications
There are a lot of Texas Instruments MC3303DR Instrumentational OP Amps applications.
- Tablets
- Proportional counter tubes
- Automatic control
- Exponential operation circuits
- Multiplication circuits
- Band-stop filter
- E-book readers
- Integrator circuits
- Scintillation detectors
- ECG equipment
