MC3303DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC3303 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-18/3/36V |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 2.8mA |
| Output Current | 30mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 1μA |
| Power Supply Rejection Ratio (PSRR) | 38.24dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 1MHz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC3303DR2G Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 14V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 10mV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 2.8mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
MC3303DR2G Features
14 Pins
supply voltage of 14V
106.02dB voltage gain
MC3303DR2G Applications
There are a lot of ON Semiconductor MC3303DR2G Instrumentational OP Amps applications.
- Hand-held batteries
- Car stereo
- Television broadcasting equipment
- Professional videography
- Signal operation
- Video conversion and routing
- Medical instruments
- Power transmission
- Biopotential
- Test and measurement instruments
