MC33060AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC33060A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 200kHz |
| Max Duty Cycle | 96 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33060AD Overview
In the 14-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 7V~40V. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 25kHz. The Surface Mount makes it ideal for general dc dc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Various 14 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. MC33060A can be used to locate other relevant dc to dc converter ics. In total, switching converter has 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 7V. The test statistics indicate that DC regulator outputs a voltage of 30V. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 200mA. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. It is estimated that this dc regulatorhas a maximum frequency of 200kHz. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably.
MC33060AD Features
Transistor Driver Outputs
Switching Frequency: 25kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
MC33060AD Applications
There are a lot of ON Semiconductor MC33060AD DC to DC converter applications.
- Digital display device
- Automatic testing equipment
- Wide-range voltage regulation circuits
- Sink circuits
- Sensitive electronic devices
- Scientific research
- Automation technology
- Serial communication converter
- Imported equipment
- Constant current circuits
