MC33060APG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | MC33060A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Max Supply Current | 15mA |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 200kHz |
| Max Duty Cycle | 96 % |
| Height Seated (Max) | 4.69mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC33060APG Overview
In the 14-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 7V~40V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. It can switch at 25kHz. dc dc regulators can be carried out with Surface Mount. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Various 14 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "MC33060A". There are a total of 14 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. 7V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 30V voltage. The dc to dc regulator can only accept 40V input voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. It is set to 96 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototype designs, DC switcher is qualified as a Through Hole. There is a maximum frequency of 200kHz on this dc regulators. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. Having a current greater than 15mA may result in improper operation and possibly damage to the component.
MC33060APG Features
Transistor Driver Outputs
Switching Frequency: 25kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
MC33060APG Applications
There are a lot of ON Semiconductor MC33060APG DC to DC converter applications.
- Printing equipment
- Low output voltage switching power supply circuits
- Hydraulic presses
- Scientific testing
- Photovoltaic power
- Motor controller circuits
- PSRR circuits
- CNC system
- Post equipment
- Digital video recorders
