Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Weight |
440.409842mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MC33063 |
Function |
Step-Up, Step-Down |
Number of Outputs |
1 |
Output Voltage |
40V |
Output Type |
Adjustable |
Max Output Current |
750mA |
Voltage - Input (Min) |
3V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive or Negative |
Current - Output |
1.5A Switch |
Quiescent Current |
4mA |
Max Output Voltage |
40V |
Voltage - Output (Min/Fixed) |
1.25V |
Topology |
Buck, Boost |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
100kHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
1.25V |
Switcher Configuration |
BUCK-BOOST |
Voltage - Output (Max) |
40V Switch |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC33063AP Overview
It is designed to provide optimal performance by utilizing the Tube package. During the development of this harley voltage regulator, 8 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the 8-DIP (0.300, 7.62mm) package. DC DC switching regulator is configured with 1 outputs. This DC DC switching regulator generates Adjustable output on its output pins. Through Hole-mount switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. There is a switching frequency of 100kHz for this voltage regulator 12v. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.25V. This voltage regulator 12v features maximum design flexibility thanks to its 1.5A Switch output current. An input voltage of 5V is required for switching regulator operation. This voltage regulator is included in the Switching Regulator or Controllers subcategory. DC/DC regulators such as this one belong to the MC33063 family of products. A voltage of 40V volts can be generated by DC DC switching regulator. In order to operate voltage regulator, there are 8 pins that must be connected. Ideally this switch regulator should have an output voltage of about 1.25V at the very least. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 750mA A. 40V Switch's maximal output voltage allows adjusting voltage regulator to operate easily. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 40V. Without external influences, harley voltage regulator consumes 4mAA of quiescent current. I would recommend this voltage regulator for use on a 5V volt supply, as it is suitable for this application.
MC33063AP Features
1 outputs
8 pins
MC33063AP Applications
There are a lot of Texas Instruments MC33063AP Voltage Regulators applications.
- Direct power supply system
- Terrestrial set-top boxes
- Driver circuits
- Overvoltage protection circuits in TV sets
- Balance equipment
- Computer application technology
- Telecommunications equipment
- Servo drive system
- Machining centers
- Scientific research