MC33067DWR2G
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 500μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 8.6V~20V |
| Control Features | Enable, Soft Start |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.05MHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.2MHz |
| Max Duty Cycle | 25 % |
| Isolation | Non-Isolated |
| Output Phases | 1 |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33067 |
| Function | Step-Up/Step-Down |
MC33067DWR2G Overview
This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.295, 7.50mm Width) package. This dc motor controller can be used to generate outputs with 2 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 8.6V~20V. Suitable for a -40°C~85°C TA dc switcher. Switching can be done at 2.05MHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including RESONANT CONTROL. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MC33067". In total, switching converter has 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 5.2V voltage. In most cases, the dc dc regulator's output current is 300mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 25 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 2.2MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. With a current supply of 500μA, it runs.
MC33067DWR2G Features
Transistor Driver Outputs
Switching Frequency: 2.05MHz
Enable, Soft Start
RESONANT CONTROL
Max Duty Cycle: 25 %
MC33067DWR2G Applications
There are a lot of ON Semiconductor MC33067DWR2G DC to DC converter applications.
- Network technology
- Surge protection circuits
- Elevator lighting
- Motor controller circuits
- Computed tomography (CT)
- Solar power plants
- Sink circuits
- Grinders
- Adjustable voltage or current linear circuits
- Printing equipment
