MC33067PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33067 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.6V~20V |
| Max Supply Current | 800μA |
| Control Features | Enable, Soft Start |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.05MHz |
| Halogen Free | Halogen Free |
| Control Technique | RESONANT CONTROL |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 25 % |
| Output Phases | 1 |
| Height | 3.43mm |
| Length | 19.55mm |
| Width | 6.85mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33067PG Overview
It comes in a 16-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tube enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). 8.6V~20V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 2.05MHz. dc dc regulators can be carried out with Through Hole. To provide efficient switching control, Enable, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. An array of 16 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include RESONANT CONTROL. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics will be returned if you search "MC33067". 16 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 5.1V voltage according to the test statistics. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 25 % duty cycle during power-ups and power-downs to ensure reliability. The Through Hole makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. A current greater than 800μA may result in improper operation and possibly damage to the component.
MC33067PG Features
Transistor Driver Outputs
Switching Frequency: 2.05MHz
Enable, Soft Start
RESONANT CONTROL
Max Duty Cycle: 25 %
Frequency: 1MHz
MC33067PG Applications
There are a lot of ON Semiconductor MC33067PG DC to DC converter applications.
- Thermal power
- Industrial robots
- Product burn-in
- Grinders
- Printing
- Machining centers
- Gear/thread machining machines
- Serial communication converter
- Electric heating, lighting
- Photovoltaic power
