MC33071ADG
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33071A |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 1.9mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
MC33071ADG Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 1.9mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 100dB at all times. There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 22V voltage. This linear amplifier pack is based on the RAIL axis.
MC33071ADG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC33071ADG Applications
There are a lot of ON Semiconductor MC33071ADG Instrumentational OP Amps applications.
- Portable docking station
- Medical instruments
- High/low-pass filter circuit
- Micro signal measurement
- Band-stop filter
- High speed sample
- Image computer boards
- Medical imaging
- Gaming industry
- Television
