Parameters |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC33072A |
Pin Count |
8 |
Operating Supply Voltage |
22V |
Power Supplies |
+-15V |
Number of Channels |
2 |
Operating Supply Current |
1.9mA |
Nominal Supply Current |
3.8mA |
Output Current |
30mA |
Slew Rate |
13V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
100nA |
Voltage - Supply, Single/Dual (±) |
3V~44V ±1.5V~22V |
Halogen Free |
Halogen Free |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
3mV |
Bandwidth |
4.5MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4500 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.7μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
500μV |
Bias Current-Max (IIB) @25C |
0.5μA |
Nominal Gain Bandwidth Product |
4.5MHz |
Height |
1.4986mm |
Length |
4.9784mm |
Width |
3.9878mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 21 hours ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
RAIL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
MC33072ADG Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 3mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 1.9mA . Keeping the voltage gain at 100dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. To pack the operational amplifier ics, RAIL is adopted as the packing method.
MC33072ADG Features
8 Pins
supply voltage of 15V
100dB voltage gain
MC33072ADG Applications
There are a lot of ON Semiconductor MC33072ADG Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Exponential operation circuits
- MP3
- Proportional counter tubes
- Portable electronic products powered by batteries
- Wireless base stations
- Instrumentation
- Video conversion and routing
- Industrial applications including automation
- Communication device