banner_page

MC33072ADR2

30mA per Channel 100nA 80 dB Instrumentational OP Amps 0.7μA 22V 3V~44V ±1.5V~22V MC33072A 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC33072ADR2
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 716
  • Description: 30mA per Channel 100nA 80 dB Instrumentational OP Amps 0.7μA 22V 3V~44V ±1.5V~22V MC33072A 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status OBSOLETE (Last Updated: 4 hours ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Published 2010
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 15V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MC33072A
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 22V
Power Supplies +-15V
Number of Circuits 2
Operating Supply Current 1.9mA
Nominal Supply Current 3.8mA
Output Current 30mA
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 100nA
Voltage - Supply, Single/Dual (±) 3V~44V ±1.5V~22V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 500μV
Gain Bandwidth Product 4.5MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 4500 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.7μA
Low-Offset NO
Frequency Compensation YES
Bias Current-Max (IIB) @25C 0.5μA
Nominal Gain Bandwidth Product 4.5MHz
Height Seated (Max) 1.75mm
Length 4.9mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC33072ADR2 Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a General Purpose type op amp. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.9mA . It is recommended to keep the voltage gain at 100dB at all times. A instrumentation amplifier like this has 2 circuits. The operating supply voltage of the buffer op amp is rated at 22V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.

MC33072ADR2 Features


8 Pins
supply voltage of 15V
100dB voltage gain

MC33072ADR2 Applications


There are a lot of ON Semiconductor MC33072ADR2 Instrumentational OP Amps applications.

  • Portable docking station
  • Proportional counter tubes
  • Logarithmic operation circuits
  • Power generator
  • Fast A/D and D/A converters
  • single/dual op amp sum and difference circuits
  • Polarized electrodes
  • High/low-pass filter circuit
  • Test equipment
  • Tablets

Write a review

Note: HTML is not translated!
    Bad           Good