MC33074APG
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 12 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33074A |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 7.6mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Height | 4.95mm |
| Length | 19.69mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
MC33074APG Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 14 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electronic part, it is recommended that you mount it with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 1.9mA supply current, this operational amplifier ics can be operated. 100dB should remain the voltage gain. Op amp ic has 4 channels. The operating supply voltage of the buffer op amp is rated at 22V. RAIL is adopted to pack the instrumentation amplifier.
MC33074APG Features
14 Pins
supply voltage of 15V
100dB voltage gain
MC33074APG Applications
There are a lot of ON Semiconductor MC33074APG Instrumentational OP Amps applications.
- Power transmission
- pH (acidity)
- Biopotential
- Test and measurement instruments
- Digital cameras
- Television
- Non-polarized electrodes
- Video computer boards
- Cinema or auditorium audio system
- Signal transformation
