MC33077DG
| Parameters | |
|---|---|
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33077 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 3.5mA |
| Output Current | 26mA |
| Slew Rate | 11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 280nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 37MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 7500 kHz |
| Voltage Gain | 65.34dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 130μV |
| Bias Current-Max (IIB) @25C | 1μA |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 37MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 14 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
MC33077DG Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 3.5mA . Maintain 65.34dB as the voltage gain. 2 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. RAIL is adopted to pack the instrumentation amplifier.
MC33077DG Features
8 Pins
supply voltage of 15V
65.34dB voltage gain
MC33077DG Applications
There are a lot of ON Semiconductor MC33077DG Instrumentational OP Amps applications.
- Broadcasting
- Multiplication circuits
- Non-polarized electrodes
- Portable docking station
- Tablets
- Portable electronic products powered by batteries
- Exponential operation circuits
- Biopotential
- Measurements of Wheatstone bridge
- Signal filtering
