MC33077DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33077 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 3.5mA |
| Output Current | 26mA |
| Slew Rate | 11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 280nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 37MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 7500 kHz |
| Voltage Gain | 65.34dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 130μV |
| Bias Current-Max (IIB) @25C | 1μA |
| Nominal Gain Bandwidth Product | 37MHz |
| Height | 1.5mm |
| Length | 4mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33077DR2G Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 3.5mA. It is recommended to keep the voltage gain at 65.34dB at all times. There is a rating of 2 for the operating supply voltage of the buffer op amp. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
MC33077DR2G Features
8 Pins
supply voltage of 15V
65.34dB voltage gain
MC33077DR2G Applications
There are a lot of ON Semiconductor MC33077DR2G Instrumentational OP Amps applications.
- Commercial audio systems
- Scintillation detectors
- Signal amplification
- Blood pressure sensors
- Signal filtering
- Information processing
- Video conversion and routing
- MP3
- Proportional counter tubes
- Home audio systems
